Oscualti Two-Component Epoxy Resin

1. Ensure the surfaces are clean, dry, and free of any oil, grease, or other contaminants.
2. Mix the two components in the correct ratio of 2:1, using a clean and dry mixing container.
3. Stir the mixture thoroughly until the components are fully blended together. It is recommended to use a mixing stick or a mechanical mixer for the best results.
4. Apply the mixture to the surface to be treated using a brush, roller, or spatula.
5. The hardening time can be altered depending on room temperature; higher temperatures will speed up the hardening process, while lower temperatures will slow it down.
6. Do not apply the mixture in temperatures below 5°C or above 35°C.
7. Allow the mixture to cure fully, which may take up to 24 hours, depending on the room temperature and humidity.
8. After curing, the surface can be sanded and painted, if desired.

Note: It is important to follow the manufacturer’s instructions and safety precautions when using this product. Wear appropriate protective clothing and equipment, and avoid breathing in vapors or skin contact with the mixture.

Package 0.750 (0.500 kg of resin + 0.250 kg of hardener)

• Weight: 0,95 k