Polymarine Inflatable Boat Fabrics Hypalon Black 70cm x 15cm
£24.95
Polymarine Inflatable Boat Fabrics Hypalon Black 70cm x 15cm is a high-quality inflatable boat fabric designed for professional boat builders and repairers. The fabric is made of a synthetic rubber called Hypalon that is renowned for its strength, durability, and resistance to UV rays, chemicals, and extreme weather conditions.
This fabric is ideal for use in the construction and repair of inflatable boats, RIBs, and other watercraft that require a strong, flexible, and long-lasting material. The grey color of the fabric is not only aesthetically pleasing but also helps to prevent fading caused by prolonged exposure to sunlight.
At 70cm x 15cm, this fabric is large enough to cover a variety of areas on a boat, including patches, repairs, and reinforcements. The fabric can be easily cut to size and bonded to the boat using a suitable adhesive.
Overall, Polymarine Inflatable Boat Fabrics Hypalon Black 70cm x 15cm is a reliable and versatile material that can help to extend the life of your inflatable boat or watercraft. Its high-quality construction, durability, and resistance to harsh conditions make it a top choice for boat builders and repairers.
5 in stock
Polymarine Inflatable Boat Fabrics Hypalon Black 70cm x 15cm is a material used for the construction and repair of inflatable boats and watercraft. Here are some general steps to follow when using this fabric:
- Prepare the area: Before applying the fabric, make sure the area is clean and free of debris. Use a cleaning solution to remove any dirt or grease that may be present.
- Cut the fabric: Cut the Hypalon fabric to the desired size and shape using scissors or a sharp knife. Leave a small amount of excess material around the edges to allow for bonding.
- Apply adhesive: Apply a suitable adhesive to both the fabric and the surface to which it will be bonded. Follow the manufacturer’s instructions for the adhesive and ensure that you are using the correct type for Hypalon fabric.
- Position the fabric: Place the Hypalon fabric over the damaged or weakened area, making sure it is properly aligned.
- Bond the fabric: Press the fabric firmly onto the surface and smooth out any air bubbles or wrinkles. Allow the adhesive to cure according to the manufacturer’s instructions.
- Test the repair: After the adhesive has cured, test the repair by inflating the boat or watercraft and checking for any leaks or weaknesses.
It’s important to follow the manufacturer’s instructions for the specific adhesive and application process to ensure the best results. If you are unsure about any aspect of the process, it’s best to consult a professional boat repairer or technician.
Related products
Boat Maintenance
Boat Maintenance
Boat Maintenance
Boat Maintenance
Boat Maintenance
Boat Maintenance
Boat Maintenance
Boat Maintenance
_
_
_
Scepter